HP Deskpro /M Desktop PC 486/33M Deskpro Personal Computers Service Reference - Page 52

-213, Screen Message, Beeps, Probable Cause, Recommended Action

Get HP Deskpro /M Desktop PC 486/33M PDF manuals and user guides View all HP Deskpro /M Desktop PC 486/33M manuals
Add to My Manuals
Save this manual to your list of manuals

Page 52 highlights

POST Error Messages Continued Screen Message 164-Memory Size Error Beeps* 2S Probable Cause Memory configuration is incorrect. 183-Invalid Processor Jumper Setting 201-Memory Error 2S None System board jumper improperly set. RAM failure. 202-Memory Type Mismatch None 207-ECC Corrected Single 2S Bit Errors in DIMM/SIMM Pair(s) X,X,... in Memory Socket(s) y,y Memory modules do not match each other. Single Bit ECC error. Recommended Action 1. Run Computer Setup (F10 Setup) or Windows utilities. 2. Make sure memory module(s) (if any) are installed properly. 3. Verify proper memory module type. Reset system board jumpers to match processor and bus speeds. 1. Run computer Setup (F10 Setup) or Windows utilities. 2. Ensure memory and continuity modules are installed correctly. 3. Verify proper memory module type. 4. Remove and replace memory module(s) one at a time to isolate faulty module. 5. Replace the faulty memory module(s). 6. If error persists after replacing memory modules, replace the system board. Replace memory modules with matched sets. 1. Verify proper memory module type. 2. Try another memory socket. 3. Replace memory module if problem persists. 213-Incompatible DIMM 2S Module in DIMM Socket(s) X,X, X * L = Long, S = Short A DIMM module in DIMM 1. Verify proper memory module socket identified in the error type. message is missing critical SPD information, or is incompatible with the chipset. 2. Try another memory socket. 3. Replace DIMM with a module conforming to the SPD standard. continued D-2 POST Error Messages

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
D-2
POST Error Messages
POST Error Messages
Continued
Screen Message
Beeps*
Probable Cause
Recommended Action
164-Memory Size Error
2S
Memory configuration
is incorrect.
1.
Run Computer Setup (F10
Setup) or Windows utilities.
2.
Make sure memory module(s)
(if any) are installed properly.
3.
Verify proper memory module
type.
183-Invalid Processor
Jumper Setting
2S
System board jumper
improperly set.
Reset system board jumpers to
match processor and bus speeds.
201-Memory Error
None
RAM failure.
1.
Run computer Setup (F10
Setup) or Windows utilities.
2.
Ensure memory and continuity
modules are installed correctly.
3.
Verify proper memory module
type.
4.
Remove and replace memory
module(s) one at a time to
isolate faulty module.
5.
Replace the faulty memory
module(s).
6.
If error persists after replacing
memory modules, replace the
system board.
202-Memory Type Mismatch
None
Memory modules do not
match each other.
Replace memory modules with
matched sets.
207-ECC Corrected Single
Bit Errors in DIMM/SIMM
Pair(s) X,X,... in Memory
Socket(s) y,y
2S
Single Bit ECC error.
1.
Verify proper memory module
type.
2.
Try another memory socket.
3.
Replace memory module if
problem persists.
213-Incompatible DIMM
Module in DIMM Socket(s)
X,X, X
2S
A DIMM module in DIMM
socket identified in the error
message is missing critical
SPD information, or is
incompatible with the
chipset.
1.
Verify proper memory module
type.
2.
Try another memory socket.
3.
Replace DIMM with a module
conforming to the SPD
standard.
* L = Long, S = Short
continued