HP Deskpro /M Desktop PC 486/33M Deskpro Personal Computers Service Reference - Page 57

-1790, Run the Drive Protection

Get HP Deskpro /M Desktop PC 486/33M PDF manuals and user guides View all HP Deskpro /M Desktop PC 486/33M manuals
Add to My Manuals
Save this manual to your list of manuals

Page 57 highlights

POST Error Messages Continued Screen Message 1781-Disk 1 Failure Beeps* None Probable Cause Hard drive/format error. 1782-Disk Controller Failure None Hard drive circuitry error. 1790-Disk 0 Failure None Hard drive error or wrong drive type. * L = Long, S = Short Recommended Action 1. Run Computer Setup (F10 Setup). 2. Clear CMOS. 3. Check cable seating/jumper settings. 4. Run hard drive diagnostics. 5. Disconnect additional drives. 6. Run the Drive Protection System test if available. 7. Replace the hard drive. 1. Run Computer Setup (F10 Setup). 2. Clear CMOS. 3. Check cable seating /jumper settings. 4. Run hard drive diagnostics. 5. Disconnect additional drives. 6. Run the Drive Protection System test if available. 7. Replace the hard drive. 8. Replace the system board. 1. Run Computer Setup (F10 Setup). 2. Clear CMOS. 3. Check cable seating /jumper settings. 4. Run hard drive diagnostics. 5. Disconnect additional drives. 6. Confirm drive is supported on this computer (Large drive ROM support.) 7. Run the Drive Protection System test if available. 8. Replace the hard drive. 9. Replace the system board. continued Deskpro Service Reference Guide D-7

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
Deskpro Service Reference Guide
D-7
POST Error Messages
Continued
Screen Message
Beeps*
Probable Cause
Recommended Action
1781-Disk 1 Failure
None
Hard drive/format error.
1.
Run Computer Setup (F10
Setup).
2.
Clear CMOS.
3.
Check cable seating/jumper
settings.
4.
Run hard drive diagnostics.
5.
Disconnect additional drives.
6.
Run the Drive Protection
System test if available.
7.
Replace the hard drive.
1782-Disk Controller
Failure
None
Hard drive circuitry error.
1.
Run Computer Setup (F10
Setup).
2.
Clear CMOS.
3.
Check cable seating /jumper
settings.
4.
Run hard drive diagnostics.
5.
Disconnect additional drives.
6.
Run the Drive Protection
System test if available.
7.
Replace the hard drive.
8.
Replace the system board.
1790-Disk 0 Failure
None
Hard drive error or wrong
drive type.
1.
Run Computer Setup (F10
Setup).
2.
Clear CMOS.
3.
Check cable seating /jumper
settings.
4.
Run hard drive diagnostics.
5.
Disconnect additional drives.
6.
Confirm drive is supported on
this computer (Large drive
ROM support.)
7.
Run the Drive Protection
System test if available.
8.
Replace the hard drive.
9.
Replace the system board.
* L = Long, S = Short
continued