HP Integrity Superdome 2 16-socket HP Integrity Superdome 2 User Service Guide - Page 84

Troubleshooting CAMNet issues

Get HP Integrity Superdome 2 16-socket PDF manuals and user guides View all HP Integrity Superdome 2 16-socket manuals
Add to My Manuals
Save this manual to your list of manuals

Page 84 highlights

EBIPA Settings - Device Bay iLO Processors Domain: Subnet Mask: 255.255.255.0 DNS Server1: 0.0.0.0 Server3: 0.0.0.0 Gateway: 172.22.aaa.bbb Server2: 0.0.0.0 Bay Enabled EBIPA Address Current Address Device Type 1 Yes 172.22.a.b 172.22.a.b Server Blade 1A No N/A [Absent] 1B No N/A [Absent] 2 Yes 172.22.a.b 172.22.a.b Server Blade . . SHOW OA NETWORK ALL Onboard Administrator #1 Network Information: Name: OA-1 DHCP: Disabled IP Address: 172.22.aaa.bbb Netmask: 255.255.255.0 Gateway Address: 172.22.aaa.bbb Primary DNS: 0.0.0.0 Secondary DNS: 0.0.0.0 MAC Address: 9C:8E:99:29:xy:yx Link Settings: Auto-Negotiation, 1000 Mbit, Full Duplex Link Status: Active Enclosure IP Mode: Disabled Onboard Administrator #2 Network Information: Name: OA-2 DHCP: Disabled IP Address: 172.22. aaa.bbb Netmask: 255.255.255.0 Gateway Address: 172.22. aaa.bbb Primary DNS: 0.0.0.0 Secondary DNS: 0.0.0.0 MAC Address: 9C:8E:99:29:xy:xy Link Settings: Auto-Negotiation, 1000 Mbit, Full Duplex Link Status: Active Enclosure IP Mode: Disabled Troubleshooting CAMNet issues Check the proper cabling between all the enclosures within a complex using the HR> test camnet command: OA1> show hr OA1 HR> test camnet enclosure9/midplane0 Invoke CAMNet Test on location 0x0900FFFF01FFFF69 CAMNet test has executed without finding faults Success: CAMNet test completed with no errors Test complete OA1 HR> test camnet enclosure1/blade1 Invoke CAMNet Test on location 0x0100FF01FFFFFF94 CAMNet test has executed without finding faults Success: CAMNet test completed with no errors 84 Troubleshooting

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
EBIPA Settings - Device Bay iLO Processors
Domain:
Subnet Mask: 255.255.255.0
Gateway: 172.22.aaa.bbb
DNS Server1: 0.0.0.0
Server2: 0.0.0.0
Server3: 0.0.0.0
Bay Enabled
EBIPA Address
Current Address Device Type
--- ------- --------------- --------------- ------------
1
Yes
172.22.a.b
172.22.a.b
Server Blade
1A
No
N/A
[Absent]
1B
No
N/A
[Absent]
2
Yes
172.22.a.b
172.22.a.b
Server Blade
.
.
SHOW OA NETWORK ALL
Onboard Administrator #1 Network Information:
Name: OA-1
DHCP: Disabled
IP Address: 172.22.aaa.bbb
Netmask: 255.255.255.0
Gateway Address: 172.22.aaa.bbb
Primary DNS: 0.0.0.0
Secondary DNS: 0.0.0.0
MAC Address: 9C:8E:99:29:xy:yx
Link Settings: Auto-Negotiation, 1000 Mbit, Full Duplex
Link Status: Active
Enclosure IP Mode: Disabled
Onboard Administrator #2 Network Information:
Name: OA-2
DHCP: Disabled
IP Address: 172.22. aaa.bbb
Netmask: 255.255.255.0
Gateway Address: 172.22. aaa.bbb
Primary DNS: 0.0.0.0
Secondary DNS: 0.0.0.0
MAC Address: 9C:8E:99:29:xy:xy
Link Settings: Auto-Negotiation, 1000 Mbit, Full Duplex
Link Status: Active
Enclosure IP Mode: Disabled
Troubleshooting CAMNet issues
Check the proper cabling between all the enclosures within a complex using the
HR> test
camnet <location>
command:
OA1> show hr
OA1 HR> test camnet enclosure9/midplane0
Invoke CAMNet Test on location 0x0900FFFF01FFFF69
CAMNet test has executed without finding faults
Success: CAMNet test completed with no errors
Test complete
OA1 HR> test camnet enclosure1/blade1
Invoke CAMNet Test on location 0x0100FF01FFFFFF94
CAMNet test has executed without finding faults
Success: CAMNet test completed with no errors
84
Troubleshooting