HP LaserJet 1220 HP LaserJet 1200 Series - User Guide - Page 137
spring-loaded base. If the separation, pad is not straight or you see space
View all HP LaserJet 1220 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 137 highlights
5 5 Reach in through the opening, push the spring-loaded base down with one hand, and pull the separation pad up with the other hand. 6 With one hand, position the new separation pad in the slot of the previous separation pad (A). With the other hand, reach through the input tray opening, and push the 6 spring-loaded base down (B). Note The tab on the right is larger to help you position it correctly. 7 Snap both sides of the separation pad firmly into place. 7 CAUTION Make sure that the separation pad is straight and that there is no space between the separation pad and the spring-loaded base. If the separation pad is not straight or you see space on one side, remove the separation pad, make sure that the larger tab is on the 8 right, reinsert the separation pad, and snap both sides into place. 8 Reinsert the pickup roller, toner cartridge, and input trays. Plug the printer in to turn it back on. EN Changing the printer separation pad 135