HP LaserJet 1220 HP LaserJet 1200 Series - User Guide - Page 51

Optionally, you can use BootP (Bootstrap Protocol) or DHCP (Dynamic Host Configuration Protocol) to automatically configure the IP address over the network each time the print server is turned on. Compatible Web Browsers If you use Windows 9x, 2000, Millennium, or NT 4.0, the embedded web server works with the following browsers: q Netscape Navigator 4.6x, 4.7, 4.71, and 4.72 q Internet Explorer 4.0, 4.01 with SP2, 5.0, and 5.01 (Millennium requires IE 5.0 or greater) For the latest list of compatible web browsers, check HP's Customer Care online at http://www.hp.com/support/net_printing. Starting the embedded web server After you establish an IP address on the print server, perform the following steps: 1 Run a supported web browser. 2 Enter the IP address of the print server as the URL. The print server's Home page displays. 3 Click the Help link on the web page for more information. Note If you change the IP address and other parameters, the connection to the embedded web server closes. To re-establish a connection, use the new IP address as the URL. Also, some computer setups may no longer work. Using HP Web JetAdmin HP Web JetAdmin is a printer installation and management application for intranets. You can obtain this software from HP Customer Care Online at http://www.hp.com/support/net_printing. Hewlett-Packard recommends that you use HP Web JetAdmin version 6.0 or later for operation with the print server's embedded web server. EN Starting the embedded web server 49