HP LaserJet 1220 HP LaserJet 1200 Series - User Guide - Page 183
Error Code and Message, Description, LAN ERROR - LOSS
View all HP LaserJet 1220 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 183 highlights
Error Code and Message Description 0D LAN ERROR - TRANSMITTER OFF There might be a problem with your network cabling or the print server. Check the cabling and connectors on your Ethernet network. If you cannot find a problem with your network cabling, run the power-on self-test: remove and re-attach the power module connector on the print server. If the error persists, there is a problem with the print server. 0E LAN ERROR - LOSS OF Check the network connections. If the connections are intact, CARRIER run the power-on self-test: remove and re-attach the power module connector on the print server. If the error persists, replace the print server. 10 LAN ERROR - UNDERFLOW There might be a problem with your network cabling or the print server. Check the cabling and connectors on your network. If you cannot find a problem with your network cabling, run the power-on self-test: remove and re-attach the power module connector on the print server. If the error persists, there is a problem with the print server. 11 LAN ERROR - RETRY FAULTS There is a problem with your network cabling or external network configuration. Make sure that the hub or switch port is operating. 12 LAN ERROR - NO LINKBEAT With a 10Base-T or 100Base-TX port connected, Link Beat is not sensed. Check the network cable, and make sure that the concentrator or hub is providing Link Beat. 13 NETWORK RECONFIG - To enable the new configuration values, reset the print server MUST REBOOT or turn the print server off and back on. 28 OUT OF BUFFERS The print server could not allocate a buffer from its internal memory. This means that all of the buffers are busy, which might be a result of heavy broadcast traffic or large amounts of network traffic directed to the print server. 40 ARP DUPLICATE IP ADDRESS The ARP layer detected another node on the network using the same IP address as the print server. Extended error information below this message shows the hardware address of the other node. 41 NOVRAM ERROR The print server cannot read the contents of its NOVRAM. EN Understanding the print server configuration page 181