HP Nc6400 HP Compaq nc6400 Notebook PC Maintenance and Service Guide - Page 120
Remove the Mini Card WLAN module, from the Mini Card WLAN
View all HP Nc6400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 120 highlights
Removal and Replacement Procedures 6. Make note of which wireless antenna cable is attached to which antenna clip on the Mini Card WLAN module before disconnecting the cables, then disconnect the auxiliary and main wireless antenna cables 1 from the Mini Card WLAN module. ✎ The wireless antenna cables are available in the Wireless Antenna Kit, spare part number 418899-001. 7. Remove the two Phillips PM2.0×3.0 screws 2 that secure the Mini Card WLAN module to the computer. (The edge of the module opposite the socket rises away from the computer.) 8. Remove the Mini Card WLAN module 3 by pulling the module away from the socket at an degree angle. ✎ Mini Card modules are designed with a notch 4 to prevent incorrect installation. Removing a Mini Card WLAN Module Reverse the above procedure to install a Mini Card WLAN module. 5-20 Maintenance and Service Guide