HP Nc6400 HP Compaq nc6400 Notebook PC Maintenance and Service Guide - Page 134
Remove the Mini Card WWAN module, from the Mini Card WWAN
View all HP Nc6400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 134 highlights
Removal and Replacement Procedures 3. Make note of which wireless antenna cable is attached to which antenna clip on the Mini Card WWAN module before disconnecting the cables, then disconnect the auxiliary and main wireless antenna cables 1 from the Mini Card WWAN module. ✎ The wireless antenna cables are available in the Wireless Antenna Kit, spare part number 418899-001. 4. Remove the two Phillips PM2.0×3.0 screws 2 that secure the Mini Card WWAN module to the computer. (The edge of the module opposite the socket rises away from the computer.) 5. Remove the Mini Card WWAN module 3 by pulling the module away from the socket at an angle. ✎ Mini Card modules are designed with a notch 4 to prevent incorrect installation. Removing a Mini Card WWAN Module Reverse the above procedure to install a Mini Card WWAN module. 5-34 Maintenance and Service Guide