HP Officejet 700 HP OfficeJet 700 Series All-in-One - (English) User Guide - Page 29

Busy Redial, No Answer Redial, Answer Ring Pattern, Error Correction Mode

Page 29 highlights

Two First then press press 6 Menu then press 2 6 Menu then press 3 Busy Redial The HP OfficeJet is factory set to automatically redial at intervals after a busy signal. You can turn this setting off. Note: To immediately redial the last fax number you entered on the HP OfficeJet keypad, press the Redial/Pause button. No Answer Redial You can set the HP OfficeJet to automatically redial at intervals if a fax call is not answered. 6 Menu then press 4 6 Menu then press 5 Answer Ring Pattern The Answer Ring Pattern setting applies only if your phone line has more than one number, each with its own distinctive ring pattern. This is a service provided by your telephone company. If you do not have this service, the Distinctive Ring feature on the HP OfficeJet will not work and the Answer Ring Pattern should be set to All Rings. If you do have Distinctive Ring service, have your telephone company assign one ring pattern to voice calls and another to fax calls. Then use the Answer Ring Pattern setting to set your HP OfficeJet to automatically answer the fax call pattern. Note: If you have an answering machine on this line for receiving voice calls (using one of the other distinctive ring patterns), set it to answer after 3 or more rings or your HP OfficeJet will not receive fax calls. Error Correction Mode Error Correction Mode (ECM) reduces data lost due to poor phone lines. In ECM, phone charges are unaffected, or may even be reduced, on good phone lines. On poor phone lines, ECM increases sending time and phone charges, but sends the data much more reliably. ...2-5

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40

.........................................................................................................................................
2-5
Two
Busy Redial
The HP OfficeJet is factory set to automatically redial at intervals
after a busy signal. You can turn this setting off.
Note:
To immediately redial the last fax number you entered on the
HP OfficeJet keypad, press the
Redial/Pause
button.
No Answer Redial
You can set the HP OfficeJet to automatically redial at intervals if a
fax call is not answered.
Answer Ring Pattern
The Answer Ring Pattern setting applies only if your phone line has
more than one number, each with its own distinctive ring pattern. This
is a service provided by your telephone company. If you do not have
this service,
the Distinctive Ring feature on the HP OfficeJet
will not
work
and the Answer Ring Pattern should be set to
All Rings.
If you do have Distinctive Ring service, have your telephone
company assign one ring pattern to voice calls and another to fax
calls. Then use the Answer Ring Pattern setting to set your HP
OfficeJet to automatically answer the fax call pattern.
Note:
If you have an answering machine on this line for receiving
voice calls (using one of the other distinctive ring patterns), set it to
answer after 3 or more rings or your HP OfficeJet will not receive fax
calls.
Error Correction Mode
Error Correction Mode (ECM) reduces data lost due to poor phone
lines. In ECM, phone charges are unaffected, or may even be reduced,
on good phone lines. On poor phone lines, ECM increases sending
time and phone charges, but sends the data much more reliably.
Menu
6
then
press
2
First
press
then
press
Menu
6
then
press
3
Menu
6
then
press
4
Menu
6
then
press
5