HP Pavilion 11-k000 Maintenance and Service Guide - Page 47

USB/audio jack board (right side), Remove the Phillips PM2.5×4.0 screw

Page 47 highlights

USB/audio jack board (right side) Description USB/audio jack board (includes cable) Spare part number 809545-001 The USB/audio jack board is located on the right side of the computer. Do not confuse this board with the USB/ card reader/volume board on the left side of the computer. Before removing the USB/audio jack board, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the top cover (see Top cover on page 31). 5. Disconnect the battery. To remove the USB/audio jack board: 1. Remove the Phillips PM2.5×4.0 screw (1). 2. Remove the two Phillips PM2.0×2.0 screws (2). Component replacement procedures 39

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108

USB/audio jack board (right side)
Description
Spare part number
USB/audio jack board (includes cable)
809545-001
The USB/audio jack board is located on the right side of the computer. Do not confuse this board with the USB/
card reader/volume board on the left side of the computer.
Before removing the USB/audio jack board, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is
off
or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by
first
unplugging the power cord from the AC outlet and then
unplugging the AC adapter from the computer.
4.
Remove the top cover (see
Top cover
on page
31
).
5.
Disconnect the battery.
To remove the USB/audio jack board:
1.
Remove the Phillips PM2.5×4.0 screw
(1)
.
2.
Remove the two Phillips PM2.0×2.0 screws
(2)
.
Component replacement procedures
39