HP Pavilion 11-k000 Maintenance and Service Guide - Page 60
Heat sink
View all HP Pavilion 11-k000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 60 highlights
Heat sink Description Heat sink for use in models with Intel CoreT processors (includes replacement thermal material) Heat sink for use in HP Pavilion x360 Convertible models with Intel Pentium and Celeron processors (includes replacement thermal material) Heat sink for use in HP x360 310 G2 models with Intel Pentium and Celeron processors (includes replacement thermal material) Heat sink for use in models with Intel Core processors (includes replacement thermal material) Spare part number 809536-001 819788-001 824134-001 827662-001 Before removing the heat sink, follow these steps: 1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect the power from the computer by unplugging the power cord from the computer. 3. Disconnect all external devices from the computer. 4. Remove the top cover (see Top cover on page 31). 5. Remove the system board (see System board on page 45). Remove the heat sink: 1. Following the 1 through 4 sequence stamped into the heat sink, loosen the four captive Phillips screws (1) that secure the heat sink to the system board. 52 Chapter 5 Removal and replacement procedures for Authorized Service Provider parts