HP Pavilion 11-k000 Maintenance and Service Guide - Page 65
Display assembly, IMPORTANT, CAUTION
View all HP Pavilion 11-k000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 65 highlights
Display assembly Description Display assembly, full hinge-up, for use in silver models (for use only in HP x360 310 G2 models) Display assembly, full hinge-up, for use in red models (for use only in HP x360 310 G2 models) Spare part number 917360-001 918177-001 IMPORTANT: HP Pavilion x360 Convertible models spare individual display components. HP x360 310 G2 models only spare the entire display assembly. Individual display components are not spared for these models. Before removing the display assembly, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the top cover (see Top cover on page 31). 5. Remove the system board (see System board on page 45). To remove the display assembly: 1. Remove the six Phillips PM2.5×4.0 screws (1) and the Phillips PM2.0×2.5 screw (2) that secures the display assembly to the computer. CAUTION: Support the display assembly when removing the screws. Failure to support the display assembly can result in damage to the display assembly and other computer components. 2. Pull the display into the computer to remove hinges from computer (3). Component replacement procedures 57