HP Pavilion 11-k000 Maintenance and Service Guide - Page 73

Power connector cable, that secures the bracket to the computer.

Get HP Pavilion 11-k000 PDF manuals and user guides View all HP Pavilion 11-k000 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 73 highlights

Power connector cable Description Power connector cable Spare part number 807522-001 Before removing the power connector cable, follow these steps: 1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect the power from the computer by unplugging the power cord from the computer. 3. Disconnect all external devices from the computer. 4. Remove the top cover (see Top cover on page 31). 5. Remove the system board (see System board on page 45). 6. Remove the display (see Display assembly on page 57). Remove the power connector cable: 1. Remove the Phillips PM2.0×2.0 screw (1) that secures the bracket to the computer. 2. Remove the bracket from the computer (2). 3. Pull the connector out from under the rear corner of the computer (3). 4. Remove the power connector cable. Reverse this procedure to install the power connector cable. Component replacement procedures 65

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
Power connector cable
Description
Spare part number
Power connector cable
807522-001
Before removing the power connector cable, follow these steps:
1.
Turn
off
the computer. If you are unsure whether the computer is
off
or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect the power from the computer by unplugging the power cord from the computer.
3.
Disconnect all external devices from the computer.
4.
Remove the top cover (see
Top cover
on page
31
).
5.
Remove the system board (see
System board
on page
45
).
6.
Remove the display (see
Display assembly
on page
57
).
Remove the power connector cable:
1.
Remove the Phillips PM2.0×2.0 screw
(1)
that secures the bracket to the computer.
2.
Remove the bracket from the computer
(2)
.
3.
Pull the connector out from under the rear corner of the computer
(3)
.
4.
Remove the power connector cable.
Reverse this procedure to install the power connector cable.
Component replacement procedures
65