HP Pavilion 11-k000 Maintenance and Service Guide - Page 72
Power button board, Remove the Phillips PM2.5×3.0 screw
View all HP Pavilion 11-k000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 72 highlights
Power button board Description Power button board for use in HP Pavilion x360 models (includes cable) Power button board for use in HP x360 310 G2 models (includes cable) Spare part number 809546-001 824140-001 Before removing the power button board, follow these steps: 1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect the power from the computer by unplugging the power cord from the computer. 3. Disconnect all external devices from the computer. 4. Remove the top cover (see Top cover on page 31). 5. Remove the system board (see System board on page 45). 6. Remove the display (see Display assembly on page 57). Remove the power button board: 1. Remove the Phillips PM2.5×3.0 screw (1) that secures the power button board to the computer. 2. Remove the power button board and cable (2). Reverse this procedure to install the power button board. 64 Chapter 5 Removal and replacement procedures for Authorized Service Provider parts