HP Pavilion 11-k000 Maintenance and Service Guide - Page 54
Speaker cable, Power connector cable
![]() |
View all HP Pavilion 11-k000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 54 highlights
5. Disconnect the battery. NOTE: When replacing the system board, be sure that the following components (as necessary) are removed from the defective system board and installed on the replacement system board: ● WLAN module (see WLAN module on page 51) ● Solid-state drive (see Solid-state drive (M.2) on page 37) ● Heat sink (see Heat sink on page 52) Remove the system board: 1. Disconnect the following cables from the system board: (1): Display cable (2): Touch board cable (3): Power connector cable (4): Speaker cable (5): USB/card reader board cable (6): Wireless antennas (may include one or two antennas) (7): Power button board cable 46 Chapter 5 Removal and replacement procedures for Authorized Service Provider parts
![](/manual_guide/products/hewlettpackard-pavilion-11k000-maintenance-service-guide-0df703a/54.png)
5.
Disconnect the battery.
NOTE:
When replacing the system board, be sure that the following components (as necessary) are
removed from the defective system board and installed on the replacement system board:
●
WLAN module (see
WLAN module
on page
51
)
●
Solid-state drive (see
Solid-state drive (M.2)
on page
37
)
●
Heat sink (see
Heat sink
on page
52
)
Remove the system board:
1.
Disconnect the following cables from the system board:
(1):
Display cable
(2):
Touch board cable
(3):
Power connector cable
(4):
Speaker cable
(5):
USB/card reader board cable
(6):
Wireless antennas (may include one or two antennas)
(7):
Power button board cable
46
Chapter 5
Removal and replacement procedures for Authorized Service Provider parts