HP Pro Tower 200 G9 Desktop PC Maintenance and Service Guide - Page 30

Connect external cables to the installed card, if needed. Connect internal cables to the system board

Get HP Pro Tower 200 G9 Desktop PC PDF manuals and user guides View all HP Pro Tower 200 G9 Desktop PC manuals
Add to My Manuals
Save this manual to your list of manuals

Page 30 highlights

the open slot on the rear of the chassis. Press the card straight down into the expansion socket on the system board. NOTE: When installing an expansion card, press firmly on the card so that the whole connector seats properly in the expansion card socket. 7. Rotate the slot cover retention latch back in place (1), and then replace the screw (2). 8. Connect external cables to the installed card, if needed. Connect internal cables to the system board, if needed. 9. If you are not installing a new expansion card, install an expansion slot cover to close the open slot. CAUTION: After removing an expansion card, you must replace it with a new card or expansion slot cover to properly cool internal components during operation. Expansion card 23

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
the open slot on the rear of the chassis. Press the card straight down into the expansion socket on the
system board.
NOTE:
When installing an expansion card, press firmly on the card so that the whole connector seats
properly in the expansion card socket.
7.
Rotate the slot cover retention latch back in place
(1)
, and then replace the screw
(2)
.
8.
Connect external cables to the installed card, if needed. Connect internal cables to the system board, if
needed.
9.
If you are not installing a new expansion card, install an expansion slot cover to close the open slot.
CAUTION:
After removing an expansion card, you must replace it with a new card or expansion slot
cover to properly cool internal components during operation.
Expansion card
23