HP RP7 Hardware Reference Guide HP RP7 Retail System Model 7800 - Page 19
Routing Cables to External Devices
View all HP RP7 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
14. Replace the rear I/O cover by placing the hooks on the bottom of the cover into the slots on the bottom of the chassis (1). Then rotate the top of the I/O cover up so that it snaps securely onto the chassis (2). 15. You can adjust the monitor stand height and tilt to a variety of positions. Choose a position that is the most ergonomically appropriate for your usage. Routing Cables to External Devices 1. Turn off the computer properly through the operating system, then turn off any external devices. 2. Disconnect the power cord from the power outlet. CAUTION: Regardless of the power-on state, voltage is always present on the system board as long as the system is plugged into an active AC outlet. You must disconnect the power cord to avoid damage to the internal components of the computer. Routing Cables to External Devices 13