HP RP7 Hardware Reference Guide HP RP7 Retail System Model 7800 - Page 62
bottom of the chassis 1. Then rotate the top of the I/O cover up so that it snaps securely onto
View all HP RP7 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 62 highlights
16. Slide the display head's back panel down onto the rear of the display head. 17. Reconnect all cables to the rear I/O connectors. 18. Replace the rear I/O cover by placing the hooks on the bottom of the cover into the slots on the bottom of the chassis (1). Then rotate the top of the I/O cover up so that it snaps securely onto the chassis (2). 56 Chapter 2 Hardware Upgrades
16.
Slide the display head's back panel down onto the rear of the display head.
17.
Reconnect all cables to the rear I/O connectors.
18.
Replace the rear I/O cover by placing the hooks on the bottom of the cover into the slots on the
bottom of the chassis (1). Then rotate the top of the I/O cover up so that it snaps securely onto
the chassis (2).
56
Chapter 2
Hardware Upgrades