HP RP7 Hardware Reference Guide HP RP7 Retail System Model 7800 - Page 63
Using the USB Security Cover
View all HP RP7 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 63 highlights
19. Slide the mounting bracket cover down over the stand's mounting bracket. 20. Plug in the power cord and press the power button. Using the USB Security Cover 1. Turn off the computer properly through the operating system, then turn off any external devices. 2. Disconnect the power cord from the power outlet. CAUTION: Regardless of the power-on state, voltage is always present on the system board as long as the system is plugged into an active AC outlet. You must disconnect the power cord to avoid damage to the internal components of the computer. 3. Slide down the two levers on the upper corners of the rear I/O panel (1) and rotate the cover off (2). Using the USB Security Cover 57
19.
Slide the mounting bracket cover down over the stand's mounting bracket.
20.
Plug in the power cord and press the power button.
Using the USB Security Cover
1.
Turn off the computer properly through the operating system, then turn off any external devices.
2.
Disconnect the power cord from the power outlet.
CAUTION:
Regardless of the power-on state, voltage is always present on the system board
as long as the system is plugged into an active AC outlet. You must disconnect the power cord
to avoid damage to the internal components of the computer.
3.
Slide down the two levers on the upper corners of the rear I/O panel (1) and rotate the cover off
(2).
Using the USB Security Cover
57