HP RP7 Hardware Reference Guide HP RP7 Retail System Model 7800 - Page 58
then swing the antenna bracket out away from the chassis 4., Open the memory access door 1
View all HP RP7 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 58 highlights
7. Remove the RP7 display head from the stand by removing the three screws that attach the stand's mounting bracket to the display head (1) then slide the display up and off the mounting bracket (2). 8. Lay the display head face down on a surface covered by a clean, dry cloth. 9. Open the memory access door (1), disconnect the DisplayPort power cable (2) and signal cable (3), then swing the antenna bracket out away from the chassis (4). 52 Chapter 2 Hardware Upgrades
7.
Remove the RP7 display head from the stand by removing the three screws that attach the
stand's mounting bracket to the display head (1) then slide the display up and off the mounting
bracket (2).
8.
Lay the display head face down on a surface covered by a clean, dry cloth.
9.
Open the memory access door (1), disconnect the DisplayPort power cable (2) and signal cable
(3), then swing the antenna bracket out away from the chassis (4).
52
Chapter 2
Hardware Upgrades