HP StorageWorks 8/80 Brocade Fabric Watch Administrator's Guide v6.2.0 (53-100 - Page 49
Notification methods, In this Fabric Watch notification
View all HP StorageWorks 8/80 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 49 highlights
Notification methods Chapter 5 In this chapter •Fabric Watch notification 27 •Event configuration 29 Fabric Watch notification Fabric Watch provides the following notification methods, but not all notification methods can be applied to all of the classes. Valid notification methods are represented through the valid alarm matrix, which is described in "Notification configuration" in Chapter 8, "Fabric Watch Configurations". Notification methods Error log entry (switch event) The switch event (error) log holds up to 1024 entries. This error log stores event information but does not actively send alerts. Use the errShow command to view the log. SNMP trap The Simple Network Management Protocol (SNMP) performs an operation called a trap that notifies a management station using SNMP protocol when events occur. Log entries can also trigger SNMP traps if the SNMP agent is configured. When the SNMP agent is configured to a specific error message level, then error messages at that level trigger SNMP traps. For information on configuring the SNMP agent using the snmpconfig command, see the Fabric OS Command Reference. Fabric Watch Administrator's Guide 27 53-1001188-01