HP StorageWorks 8/80 HP StorageWorks Fabric OS 6.2.0g release notes (5697-0355 - Page 53

While rekey operations are in progress, disrupting the I/O sync link Fixed in Fabric OS 6.2.0g causes rekey operations to hang. A rekey operation hangs as a result of failing over to a path that no longer has access to the physical target. The rekey operation is not completed. Fixed in Fabric OS 6.2.0g During I/O and crypto operations, three LUNs in an encryption container show Key ID Unavailable, and one LUN shows inquiry failed. However, all LUNs are fully functional with no issues in all other encryption containers. Workaround prior to update: Reboot the Encryption engine (EE). Fixed in Fabric OS 6.2.0g Mixing Fibre Channel FastWrite (FCFW) and non-FCFW flows can cause dcam entries to be set incorrectly. The FCFW flow appears to fail without any port-filter counters being incremented, indicating that the FCFW frames were seen. Fixed in Fabric OS 6.2.0g The rekey operation restarts, but hangs after all EEs in the encryption Fixed in Fabric OS 6.2.0g group are rebooted. Rekeyed LUNs remain in the Not Ready (Getting key from archive) state when the SKM (key vault) goes down, and does not recover even after the key vault is back online. LUNs cannot be recovered even after removing them from and adding them back to the target container. Fixed in Fabric OS 6.2.0g A persistently disabled GE port on an HP MP Router blade loses its persistency after hafailover, such that the port is simply disabled, rather than persistently disabled. Fixed in Fabric OS 6.2.0g A passive path LUN gets stuck in the Not Ready (Getting key from archive) state when running a test that periodically breaks the Ethernet connection to the primary key vault. Fixed in Fabric OS 6.2.0g HP StorageWorks Fabric OS 6.2.0g release notes 53