HP Surestore 64 HP Surestore Director FC-64 Product Manager User's Guide - Page 124
Select McDATA Fabric 1.0 or Open Fabric 1.0 from the Interop Mode list box.
View all HP Surestore 64 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 124 highlights
2. Select Operating Mode from the Configure menu. The Configure Operating Mode dialog box displays. Figure 36 Configure Operating Mode Dialog Box 3. Make sure that Open Systems mode is selected. HP does not support S/390 mode. 4. Select McDATA Fabric 1.0 or Open Fabric 1.0 from the Interop Mode list box. Figure 37 Configuring Interoperability Mode Select the interop mode as follows: - McDATA Fabric 1.0. Select this mode if the director is fabric-attached only to compatible McDATA switches or FC-64 devices and you require port zoning. - Open Fabric 1.0. Select this mode if the director is fabric-attached to McDATA switches, FC-64 devices, or other open-fabric compliant switches. Note that port zoning is not supported in Open Fabric mode. 5. Click Activate to save your changes and to close the dialog box. 108 Configure Operating Mode