HP Surestore 64 HP Surestore Director FC-64 Product Manager User's Guide - Page 80
CTP Card Menu, FRU Properties, Beaconing, Switchover,
View all HP Surestore 64 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 80 highlights
CTP Card Menu Right click the CTP card in the Hardware View to display a menu with the following options: • FRU Properties Select this option to display a FRU Properties dialog box for the CTP card. Figure 17 is an example for the power supply module. The FRU Properties dialog box includes the FRU name, position (slot number in the backplane), state (active, backup, or failed), part number, and serial number. • Beaconing Select this option to add a check mark to the check box and enable beaconing for the CTP card. This causes the amber LED on the card to flash to help you locate it in the unit. • Switchover You must have maintenance authorization rights to access this feature. Select this option to display the Switchover CTP dialog box. Click the Switchover button to switch operation from the active card to the backup card. When switchover occurs, the green LED illuminates on the backup CTP card to indicate that it is active. Figure 24 Switchover CTP Dialog box If you click the Enable Beaconing check box to add a check mark, the amber LED beacons (blinks) on the card that was the active card before switchover. If a redundant card has failed, or is not installed, selecting the Switchover button displays an error message explaining that two operational cards must be installed to use this feature. 64 Hardware View