HP Surestore 64 HP Surestore Director FC-64 Product Manager User's Guide - Page 87

Monitoring and Managing the Director connected to another director or a switch. This field displays "NA" if a segmented E_Port or invalid attachment operating state has not occurred. Refer to the section on joining zoned fabrics in the hp surestore director fc-64 Planning Guide (A6534-90903). Reason messages for segmentation can include: - Incompatible operating parameters. Operating parameters, such as resource allocation time-out values (R_A_TOV) or error-detect time-out values (E_D_TOV), are inconsistent. Refer to Configure Operating Parameters on page 110 for more information. - Duplicate domain IDs. Identical preferred domain IDs are configured for two or more directors or switches. Refer to Configure Operating Parameters on page 110 for more information. - Incompatible zoning configurations. Refer to the hp surestore director fc-64 Planning Guide (HP A6534-90903) and the hp surestore director fc-64 Installation and Service Manual (HP A6534-90902) for more information on zoning. - Build fabric protocol error. - No principal switch. A principle switch is not defined for the fabric. - No response from the attached switch. Reason messages for an invalid attachment can include: - 01 Unknown. The reason is not known. - 02 ISL connection not allowed on this port. ISL is connected to a port configured as an F_Port. - 03 ELP rejected by the attached switch. This director or switch transmitted an exchange link protocol (ELP) frame that was rejected by the switch at the other end of the ISL. - 04 Incompatible switch at other end of the ISL. The switch is configured for Open Fabric mode, and the switch at the other end of the ISL is a McDATA switch configured for McDATA Fabric mode. Hardware View 71