HP Surestore 64 HP Surestore Director FC-64 Product Manager User's Guide - Page 205

Message Cause/Solution SNMP trap address not defined. An SNMP trap address must be defined if a community name is defined. Define an SNMP address. Start diagnostics failed. The test Diagnostics for the port was already started from the Port is currently running. Diagnostics dialog box. Informational message. Stop diagnostics failed. The test is already running. Diagnostics for the port was not running and the Stop was selected on the Port Diagnostics dialog box. Diagnostics quit for the port for some reason, but the Stop button remains enabled. Verify port operation. Retry diagnostics for port and select Stop from the dialog box. If problem persists, contact your service representative. System diagnostics can not run. System diagnostics cannot run on switches with failed ports. The Operational Status is Replace failed ports. invalid. T Message Cause/Solution The add firmware process was User has ended the add firmware process. N/A. An aborted. informational message. The data collection process failed. An error occurred in the data collection process. Contact support personnel. The data collection process was User has ended the data collection process. N/A. An aborted. informational message. The data collection process failed. An error occurred in the data collection process. Contact support personnel. The data collection process was The director did not handle the action. Try action again. If aborted. problem persists, contact your support representative. The HP EFC Server is busy processing a request from another Product Manager The HP EFC Server could not process the current request because it is busy handling a request from another Product Manager. Retry the operation later. If the condition persists, contact support personnel. Appendix Appendix 189