HP Surestore 64 HP Surestore Director FC-64 Product Manager User's Guide - Page 91
Reset Port, WWN Binding,
View all HP Surestore 64 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 91 highlights
Monitoring and Managing the Director Reset Port Click to display a confirmation dialog box. Click Yes on the dialog box to reset the port. If a switch is attached to the port and online, this operation sends a link reset to the attached switch; otherwise, this action disables port beaconing for the port. If the port is in a failed state, such as after failing a loopback test, the reset restores the port to an operational state, clearing the service required (amber) LED. The reset does not affect other ports in the director. WWN Binding Click to display the Bind WWN dialog box Figure 27. Use this dialog box to allow a device with a specific WWN or nickname to have exclusive communication privileges over a port. To use this dialog box, refer to the following paragraphs. Figure 27 Bind WWN Dialog Box Bind WWN dialog box parameters: • WWN Binding: Click to place check mark in the box and enable WWN binding for the port. When enabled, only a specific device can communicate through the port.This device is specified by the WWN or nickname entered into the Bound WWN field (either the Attached WWN or WWN options). With the check box cleared, any device can communicate through the port even if a WWN or nickname is specified in the Bound WWN field. Hardware View 75