HP Surestore 64 HP Surestore Director FC-64 Product Manager User's Guide - Page 196

This appendix lists and explains messages that may display in message boxes as you use the Product Manager. Solutions to problems implied by each message are included when applicable. A Message Cause/Solution Activating this configuration will Confirmation to activate a new address configuration. Click Yes overwrite the current to confirm activating the new address configuration or click No to configuration end the operation. All configuration names must be unique. All address configurations must be save with unique names. Save the configuration with a different name that is unique to all saved configurations. All port names must be unique. A duplicate port name was entered. Every configured port name must be unique. Reconfigure the port with a unique name. Another Product Manager is Only one firmware install to a specific director can take place at a currently performing a firmware time. Wait for the current firmware install to complete and try install. again. A Product Manager instance is Only one specific Product Manager instance can be open for a open. product at any one time. Use the current open Product Manager instance. Are you sure you want to delete firmware version? Requesting confirmation to delete the firmware version. Firmware library can hold only eight firmware versions. Click Yes to confirm the firmware deletion or click No to end the operation. Are you sure you want to delete this address configuration? Confirmation to delete the selected address configuration. Click Yes to confirm the deletion of the address configuration or click No to end the operation. Are you sure you want to send firmware version? Confirmation to add a firmware version to the firmware library. The firmware library can hold eight firmware versions. Click Yes to confirm adding the firmware version to the firmware library, or click No to end the operation. 180 Appendix