HP Surestore 64 HP Surestore Director FC-64 Product Manager User's Guide - Page 156

6. Select Next when you are done. A Modify Threshold screen appears where you can change the %utilization, cumulative minutes for the threshold to occur before notification, and the time interval for measuring throughput and for alert notification. 7. Make appropriate changes, then continue through the Modify Threshold screens, making changes as necessary, until the summary screen appears displaying the alert configuration. 8. Perform either of the following steps: - If you need to change any parameters, select Previous and Next to display the desired Modify Threshold screen. - Select Finish when you are done. Activate or Deactivate Alerts Use the following steps to activate or deactivate existing threshold alerts. In the active state, notifications are generated for the alert. In the inactive state, notifications do not occur. 1. Select Threshold Alerts from the Configure menu. The Configure Threshold Alerts dialog box displays. The port's current state, deactive or active, is listed under the State column. 2. To change the state, select the alert by the alert information in the table. 3. If the alert is active, select Deactivate to change to the deactive state. If the alert is deactive, select Activate to change to the active state. Delete Alerts Use the following steps to delete existing threshold alerts. 1. Select Threshold Alerts from the Configure menu. The Configure Threshold Alerts dialog box displays. 2. Select the alert that you want to delete by selecting the alert information in the table. 3. Select Delete. 140 Configure Threshold Alerts