HP Surestore 64 HP Surestore Director FC-64 Product Manager User's Guide - Page 199

Message Cause/Solution Connection to HP EFC server lost. Click OK to exit application. Could not export log to file. The HP EFC Manager lost the network connection to the HP EFC Server. Restart the HP EFC Manager to connect to the HP EFC Server. A file I/O error occurred. The log file could not be saved to the specified destination. Ensure filename and drive are correct. Could not find firmware file. The selected file is not a firmware file. Obtain a valid firmware file from your service representative. Could not remove dump files from the HP EFC server. Dump files could not be removed from server. Link may be down or director may be busy. Retry the operation later. If the condition persists, contact support personnel. Could not stop port diagnostics. Port diagnostics could not be stopped. Link may be down or director may be busy. Retry the operation later. If the condition persists, contact support personnel. Could not write firmware to flash Firmware could not be written to flash memory. Try again. If memory. problem persists, contact support personnel. D Message Date entered is invalid. Device applications should be terminated before starting diagnostics. Press NEXT to continue. . Director must be offline to configure. Do you want to continue with IPL? Cause/Solution Date entered incorrectly. Verify that the number of days in the month is valid. Device application is not terminated. Terminate device application before running port diagnostics The director must be offline to configure Fibre Channel operating parameters. Set the director offline and reconfigure the Fibre Channel operating parameters. Requesting confirmation to proceed with an IPL. Click Yes to confirm the firmware deletion or click Cancel to end the operation. Appendix Appendix 183