HP TouchSmart tm2-1020tx HP TouchSmart tm2 Notebook PC - Maintenance and Servi - Page 67

Pen holder and eject assembly, that secure the pen holder and eject assembly

Get HP TouchSmart tm2-1020tx PDF manuals and user guides View all HP TouchSmart tm2-1020tx manuals
Add to My Manuals
Save this manual to your list of manuals

Page 67 highlights

Pen holder and eject assembly Description Pen holder and eject assembly Spare part number 592972-001 Before removing the pen holder and eject assembly, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power cord. 4. Remove the battery (see Battery on page 39). 5. Remove the following components: a. Hard drive (see Hard drive on page 41). b. Memory cover (see Memory module on page 47). c. Top cover (see Top cover on page 55). Remove the pen holder and eject assembly: 1. Remove the three Phillips PM2.0×4.0 screws (1) that secure the pen holder and eject assembly to the base enclosure. 2. Remove the pen holder (2) and eject assembly (3) from the base enclosure. Reverse this procedure to install the pen holder and eject assembly. ENWW Component replacement procedures 59

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
Pen holder and eject assembly
Description
Spare part number
Pen holder and eject assembly
592972-001
Before removing the pen holder and eject assembly, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power cord.
4.
Remove the battery (see
Battery
on page
39
).
5.
Remove the following components:
a.
Hard drive (see
Hard drive
on page
41
).
b.
Memory cover (see
Memory module
on page
47
).
c.
Top cover (see
Top cover
on page
55
).
Remove the pen holder and eject assembly:
1.
Remove the three Phillips PM2.0×4.0 screws
(1)
that secure the pen holder and eject assembly
to the base enclosure.
2.
Remove the pen holder
(2)
and eject assembly
(3)
from the base enclosure.
Reverse this procedure to install the pen holder and eject assembly.
ENWW
Component replacement procedures
59