HP TouchSmart tm2-1020tx HP TouchSmart tm2 Notebook PC - Maintenance and Servi - Page 79
Power connector and cable, Keyboard see
View all HP TouchSmart tm2-1020tx manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 79 highlights
Power connector and cable Description Power connector and cable Spare part number 592967-001 Before removing the power connector and cable, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power cord. 4. Remove the battery (see Battery on page 39). 5. Remove the following components: a. Hard drive (see Hard drive on page 41) b. Top cover (see Top cover on page 55) c. Keyboard (see Keyboard on page 57) d. Display assembly (see Display assembly on page 62) e. System board (see System board on page 67) Remove the power connector and cable: 1. Turn the system board upside down, with the rear toward you. 2. Disconnect the power connector and cable from the system board. Reverse this procedure to install the power connector and cable. ENWW Component replacement procedures 71