Husqvarna AUTOMOWER 450XH EPOS Owner Manual - Page 17
To make a work area, To make a stay-out zone, virtual boundary around a corner.
View all Husqvarna AUTOMOWER 450XH EPOS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
• A E C DF B Note: Walk 2-3 m / 6.5-9.8 ft. behind the product when you operate the product with appDrive. To make a work area Minimum 3 waypoints are necessary to make a work area. • Operate the product clockwise around the boundary of the work area. • Add waypoints on the map. Add the waypoints minimum 3 cm / 1 in. from obstacles. max 1 cm / 0.4" • Add the waypoint at the outer corner to install the virtual boundary around a corner. • Do not set waypoints that make a virtual boundary go across itself in the same work area. • Save the work area to automatically connect the first and last waypoint with a virtual boundary. 8 1 • Add a waypoint to make the product cut the grass at the edge between the lawn and the stone path. Make sure that you straddel the edge of the lawn and the stone path when you add a waypoint. The product can straddel the edge if the height of the stone path is maximum 1 cm / 0.4 in. in relation to the lawn. 2 3 5 4 7 6 To make a stay-out zone Minimum 3 waypoints are necessary to make a stay-out zone. 1970 - 001 - 10.10.2022 Installation - 17