Husqvarna AUTOMOWER 450XH EPOS Owner Manual - Page 9
Symbols on the battery, Symbols in the Automower® Connect app, EU Directives.
View all Husqvarna AUTOMOWER 450XH EPOS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
WARNING: Read the user instructions before operating the product. WARNING: Disable the product before working on or lifting the product. WARNING: Keep a safe distance from the product when operating. Keep your hands and feet away from the rotating blades. WARNING: Do not ride on the product. Do not put your hands or feet close to or under the product. The low-voltage cable must not be shortened, extended or spliced. Do not use a trimmer nearby the lowvoltage cable. Be careful when trimming edges where the cables are placed. 2.7 Symbols on the battery WARNING: Lithium-ion batteries can explode or cause fire if disassembled, short-circuited or handled roughly. Do not expose to water, fire or high temperature. Read the user instructions. Do not use a high-pressure washer or even running water to clean the product. Do not discard the battery into fire and do not expose the battery to a heat source. Use a detachable power supply as defined on the rating label next to the symbol. This product complies with the applicable EU Directives. This product complies with the applicable UK Directives. It is not permitted to dispose this product as normal household waste. Ensure that the product is recycled in accordance with local legal requirements. The chassis contains components which are sensitive to electrostatic discharge (ESD). The chassis must also be resealed in a professional manner. For these reasons the chassis shall only be opened by authorized service technicians. A broken seal can result in the entire or parts of the guarantee no longer being valid. Do not immerse the battery into water. 2.8 Symbols in the Automower® Connect app Shows the strength of the radio signal that the product receives from the reference station. The status is EPOS confirmed. The product has an accurate position and direction. This is necessary to operate the product automatically and for the installation of map objects. The status is EPOS action is necessary. The product has an accurate position but it is necessary to operate the product, manually or automatically, to get an accurate direction. The status is EPOS searching. The product does not have an accurate position and is searching for the satellite signals and the correction data to get an accurate position. 1970 - 001 - 10.10.2022 Introduction - 9