Husqvarna AUTOMOWER 450XH EPOS Owner Manual - Page 23
To stop the product, To set the product to OFF, To charge the battery, START, Main switch
View all Husqvarna AUTOMOWER 450XH EPOS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
product is paused until either Park or Start is selected in the Automower® Connect app. 4.5 To stop the product 1. Push the STOP button on top of the product. The product stops and the cutting motor stops. Note: When you push the START button again, the product continues to operate in the same operating mode as before. 4.6 To set the product to OFF 1. Push the STOP button. 2. Connect the product with Bluetooth® short-range in the app. Note: The product cannot be set to OFF if it is not connected to the app with Bluetooth®. 3. Set the Main switch to the 0 position. 4.7 To charge the battery When the product is new or after long-term storage, the battery can be empty. Charge the battery before you start the product. 1. Set the Main switch to the 1 position. 2. Put the product into the charging station until the charging plates touch the contact plates. 3. Do a check that the product charges in the Automower® Connect app. 1970 - 001 - 10.10.2022 Operation - 23