Husqvarna AUTOMOWER 450XH EPOS Owner Manual - Page 30

Message Map problem Wheel drive problem, right/ left Searching for position No accurate position from satellites Cause Action There is no specified work area. Make a work area in the Automower® Connect app. Refer to To make a work area on page 17. The charging station or the reference sta- Move the charging station or the refer- tion was moved. ence station to their initial positions. Do a new installation of the map. The map object file is incorrect. Do a check of the map in the app. Adjust the map and save it. Delete the map and do a new installation. The wheel is blocked by grass or other objects. Examine the drive wheel and remove grass or other objects. Weak satellite signal to the reference sta- The satellite signal is temporary weak. tion. The product will start to operate when the satellite signals are good. Examine the installation of the reference station. Refer to the Operator's manual for the Reference station. Weak satellite signal to the product. The satellite signal is temporary weak. The product will start to operate when the satellite signal are good. Examine if there is an object between the product and the sky that cause interference with the satellite signal. Remove the object or do a new installation to not include these parts in the work area. Refer to Installation of the map objects on page 15 Weak satellite signal to the reference sta- Examine the installation of the reference tion. station. Refer to the Operator's manual for the Reference station. Weak satellite signal to the product. Examine if there is an object between the product and the sky that cause interference with the satellite signal. Remove the object or do a new installation to not include these parts in the work area. Refer to To make a work area on page 17 30 - Troubleshooting 1970 - 001 - 10.10.2022