Husqvarna AUTOMOWER 450XH EPOS Owner Manual - Page 35

Symptoms Cause Action The product is parked for The product is parked because of the set Change the Schedule settings, or start hours in the charging station. Schedule setting, or because Park until the product. further notice is selected. The product does not operate if the battery temperature is too high or too low. The product starts to operate again when the temperature is between the set limits and the schedule settings lets the product operate. Make sure that the charging station is put in an area with protection from the sun. The product moves in circles The product operates frequently in Spiral Adjust the intensity of the Spiral cutting or spirals. cutting. or disable it if it is necessary. Refer to Spiral cutting on page 19. The product operates on a small area for a number of minutes. The product follows the GPS assisted navigation. Usual operation of the product. The product cannot connect The product is connected to a different to the mobile device. mobile device or app. Disable the app in all other connected devices. The cut result is not satisfac- The product operates for a short period. Increase the cutting time. Refer to tory. Schedule on page 18. Increase the intensity level in the Weather timer or disable the Weather timer. The work area is too large. Set a limit to the work area, or extend the operation time. Refer to To calculate the schedule setting on page 18. Blunt blades. Replace all the blades. Refer to To replace the blades on page 25. Long grass in relation to the set cutting height. Increase the cutting height and then lower it when the grass is shorter. Collection of grass by the blade disc or around the motor shaft. Remove the collection of grass and clean the product. Refer to To clean the chassis and blade disc on page 24. 1970 - 001 - 10.10.2022 Troubleshooting - 35