Husqvarna MADSAW Owner Manual - Page 12

Operation

Get Husqvarna MADSAW PDF manuals and user guides View all Husqvarna MADSAW manuals
Add to My Manuals
Save this manual to your list of manuals

Page 12 highlights

To attach the harness support hook • Attach the harness support hook on the product with the spacer, the bolt, the nut and the knob. 1. Put on the harness. 2. Attach the product to the harness support hook. 3. Adjust the length of the harness until the support hook is roughly level with your right hip. To adjust the harness Always use the harness when you operate the product. The harness gives maximum control during operation of the product. The harness decreases the risk of tiredness in your arms and back. Operation Introduction WARNING: Before you operate the product, you must read and understand the safety chapter. To check before starting 1. Inspect the working area. Remove any objects that could be thrown out. 2. Check the saw chain. Never use blunt, cracked or damaged equipment. 3. Check that the product is in perfect working order. 4. Check that all nuts and screws are tight. 5. Make sure the chain is adequately lubricated, refer to To check the chain lubrication on page 23. 6. Check that the saw chain always stops when the engine is idling. 7. Only use the product for the purpose it was intended for. 8. Make sure the handle and safety features are in order. Never use a machine that has any parts missing or has been modified in relation to the specification. Fuel This product has a two-stroke engine. CAUTION: Incorrect type of fuel can result in engine damage. Use a mixture of gasoline and two-stroke oil. Premixed fuel • Use Husqvarna premixed alkylate fuel for best performance and extension of the engine life. This fuel contains less harmful chemicals compared to regular fuel, which decreases harmful exhaust fumes. The quantity of remains after combustion is lower with this fuel, which keeps the components of the engine more clean. To mix fuel Gasoline CAUTION: Do not use gasoline with an octane number less than 90 RON (87 AKI). This can cause damage to the product. CAUTION: Do not use gasoline with more than 10% ethanol concentration (E10). This can cause damage to the product. CAUTION: Do not use leaded gasoline. This can cause damage to the product. • Always use new unleaded gasoline with a minimum octane number of 90 RON (87 AKI) and with less than 10% ethanol concentration (E10). • Use gasoline with a higher octane number if you frequently use the product at continuously high engine speed. • Always use a good quality unleaded gasoline/oil mixture. 12 1480 - 009 - 26.01.2022

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
To attach the harness support hook
•
Attach the harness support hook on the product
with the spacer, the bolt, the nut and the knob.
To adjust the harness
Always use the harness when you operate the
product. The harness gives maximum control during
operation of the product. The harness decreases the
risk of tiredness in your arms and back.
1.
Put on the harness.
2.
Attach the product to the harness support hook.
3.
Adjust the length of the harness until the support
hook is roughly level with your right hip.
Operation
Introduction
WARNING:
Before you operate the
product, you must read and understand
the safety chapter.
To check before starting
1.
Inspect the working area. Remove any objects
that could be thrown out.
2.
Check the saw chain. Never use blunt, cracked
or damaged equipment.
3.
Check that the product is in perfect working
order.
4.
Check that all nuts and screws are tight.
5.
Make sure the chain is adequately lubricated,
refer to
To check the chain lubrication on page
23
.
6.
Check that the saw chain always stops when the
engine is idling.
7.
Only use the product for the purpose it was
intended for.
8.
Make sure the handle and safety features are in
order. Never use a machine that has any parts
missing or has been modified in relation to the
specification.
Fuel
This product has a two-stroke engine.
CAUTION:
Incorrect type of fuel can
result in engine damage. Use a mixture
of gasoline and two-stroke oil.
Premixed fuel
•
Use Husqvarna premixed alkylate fuel for
best performance and extension of the engine
life. This fuel contains less harmful chemicals
compared to regular fuel, which decreases
harmful exhaust fumes. The quantity of remains
after combustion is lower with this fuel, which
keeps the components of the engine more clean.
To mix fuel
Gasoline
CAUTION:
Do not use gasoline with
an octane number less than 90 RON
(87 AKI). This can cause damage to the
product.
CAUTION:
Do not use gasoline with
more than 10% ethanol concentration
(E10). This can cause damage to the
product.
CAUTION:
Do not use leaded
gasoline. This can cause damage to the
product.
•
Always use new unleaded gasoline with a
minimum octane number of 90 RON (87 AKI)
and with less than 10% ethanol concentration
(E10).
•
Use gasoline with a higher octane number if you
frequently use the product at continuously high
engine speed.
•
Always use a good quality unleaded gasoline/oil
mixture.
12
1480 - 009 - 26.01.2022