Husqvarna MADSAW Owner Manual - Page 13

Caution, Warning

Get Husqvarna MADSAW PDF manuals and user guides View all Husqvarna MADSAW manuals
Add to My Manuals
Save this manual to your list of manuals

Page 13 highlights

Two-stroke oil • For best results and performance use Husqvarna two-stroke oil. • If Husqvarna two-stroke oil is not available, use a two-stroke oil of good quality for air-cooled engines. Speak to your servicing dealer to select the correct oil. CAUTION: Do not use two- stroke oil for water-cooled outboard engines, also referred to as outboard oil. Do not use oil for four-stroke engines. To mix gasoline and two-stroke oil Gasoline, liter 5 10 15 20 US gallon 1 2 1/2 5 Two-stroke oil, liter 2% (50:1) 0.10 0.20 0.30 0.40 US fl. oz. 2 ½ 6 ½ 12 ⅞ CAUTION: Small errors can influence the ratio of the mixture drastically when you mix small quantities of fuel. Measure the quantity of oil carefully and make sure that you get the correct mixture. 5. Carefully shake the fuel mixture. CAUTION: Do not mix fuel for more than 1 month at a time. To fill the fuel tank 1. Clean the area around the fuel tank cap. 2. Shake the container and make sure that the fuel is fully mixed. Use a fuel container with an antispill valve. 3. Fill the fuel tank. 4. Tighten the fuel tank cap carefully. 5. Move the product 3 m (10 ft) or more away from the refueling area and fuel source before starting. CAUTION: Contamination in the tanks causes malfunction. Clean the fuel tank and chain oil tank regularly and replace the fuel filter one time a year or more. To use the correct chain oil WARNING: Do not use waste oil, which can cause injury to you and the environment. Waste oil also causes damage to the oil pump, the guide bar and the saw chain. WARNING: The saw chain can break if the lubrication of the cutting equipment is not sufficient. Risk of serious injury or death to the operator. 1. Fill half the quantity of gasoline in a clean container for fuel. 2. Add the full quantity of oil. 3. Shake the fuel mixture. 4. Add the remaining quantity of gasoline to the container. WARNING: This product has a function that lets the fuel run out before the chain oil. Use the correct chain oil for this safety function to operate correctly. Speak to your servicing dealer when you select your chain oil. Note: This product has an automatic chain lubrication system. You can also adjust the oil flow. Refer to To adjust the chain lubrication on page 23. • Use only Husqvarna dielectric chain oil. 1480 - 009 - 26.01.2022 13

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
Two-stroke oil
•
For best results and performance use Husqvarna
two-stroke oil.
•
If Husqvarna two-stroke oil is not available, use
a two-stroke oil of good quality for air-cooled
engines. Speak to your servicing dealer to select
the correct oil.
CAUTION:
Do not use two-
stroke oil for water-cooled outboard
engines, also referred to as outboard
oil. Do not use oil for four-stroke
engines.
To mix gasoline and two-stroke oil
Gasoline, liter
Two-stroke
oil, liter
2% (50:1)
5
0.10
10
0.20
15
0.30
20
0.40
US gallon
US fl. oz.
1
2 ½
2 1/2
6 ½
5
12 ⅞
CAUTION:
Small errors can
influence the ratio of the mixture
drastically when you mix small quantities
of fuel. Measure the quantity of oil
carefully and make sure that you get the
correct mixture.
1.
Fill half the quantity of gasoline in a clean
container for fuel.
2.
Add the full quantity of oil.
3.
Shake the fuel mixture.
4.
Add the remaining quantity of gasoline to the
container.
5.
Carefully shake the fuel mixture.
CAUTION:
Do not mix fuel for more
than 1 month at a time.
To fill the fuel tank
1.
Clean the area around the fuel tank cap.
2.
Shake the container and make sure that the fuel
is fully mixed. Use a fuel container with an anti-
spill valve.
3.
Fill the fuel tank.
4.
Tighten the fuel tank cap carefully.
5.
Move the product 3 m (10 ft) or more away from
the refueling area and fuel source before starting.
CAUTION:
Contamination in the
tanks causes malfunction. Clean the fuel
tank and chain oil tank regularly and
replace the fuel filter one time a year or
more.
To use the correct chain oil
WARNING:
Do not use waste oil,
which can cause injury to you and
the environment. Waste oil also causes
damage to the oil pump, the guide bar
and the saw chain.
WARNING:
The saw chain can
break if the lubrication of the cutting
equipment is not sufficient. Risk of
serious injury or death to the operator.
WARNING:
This product has a
function that lets the fuel run out before
the chain oil. Use the correct chain oil for
this safety function to operate correctly.
Speak to your servicing dealer when you
select your chain oil.
Note:
This product has an automatic chain
lubrication system. You can also adjust the oil flow.
Refer to
To adjust the chain lubrication on page 23
.
•
Use only Husqvarna dielectric chain oil.
1480 - 009 - 26.01.2022
13