Husqvarna MADSAW Owner Manual - Page 7
To start the product on Maintenance
View all Husqvarna MADSAW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
2. Release the throttle trigger lockout and make sure that the throttle control is locked at idle speed. 2. Move the stop switch to the stop position and make sure that the engine stops. 3. Push the throttle trigger lockout and make sure that it goes back to its initial position when you release it. 4. Make sure that the throttle control and throttle trigger lockout move freely and that the return springs operate correctly. To do a check of the vibration damping system The vibration damping system decreases vibration in the handles to a minimum which makes the operation easier. The vibration damping system of the product decreases the transfer of vibration between the engine unit and the shaft unit of the product. 1. Stop the engine. 2. Do a visual check for deformation and damage, for example cracks. 5. Start the product and apply full throttle. Refer to To start the product on page 14. 6. Release the throttle control and make sure that the cutting attachment stops. If the cutting attachment rotates with the throttle in the idle position, do a check of the carburetor adjustments. Refer to Maintenance on page 16. 3. Make sure you attach the elements of the vibration damping system correctly. To do a check of the muffler To do a check of the stop switch 1. Start the engine. The muffler keeps noise levels to a minimum and directs exhaust fumes away from the operator. In areas with a hot, dry weather there is a high risk of fire. Obey local regulations and maintenance instructions • Do a visual check for damage and deformation. 1480 - 009 - 26.01.2022 7