IBM 43635gu Installation Guide - Page 40
expansion-slot
UPC - 883436002950
View all IBM 43635gu manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
Expansion-slot cover Adapter Left side Front adapter retention bracket Right side To install an adapter, complete the following steps: 1. Read the safety information that begins on page v and "Installation guidelines" on page 7. 2. Turn off the server and peripheral devices and disconnect all external cables and power cords; then, remove the side cover. See "Removing the side cover" on page 10. 3. Follow the cabling instructions, if any, that come with the adapter. Route the adapter cables before you install the adapter. 4. Follow the instructions that come with the adapter to set jumpers or switches, if any. 5. Rotate the rear adapter-retention bracket to the open (unlocked) position and remove it from the server. 6. Remove the screw that secures the expansion-slot cover to the chassis. Store the expansion-slot cover and screw in a safe place for future use. Note: Expansion-slot covers must be installed on all vacant slots. This maintains the electronic emissions standards of the server and ensures proper ventilation of server components. 26 System x3200 Type 4362 and 4363: Installation Guide