IBM 43635gu Installation Guide - Page 71
customer
UPC - 883436002950
View all IBM 43635gu manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 71 highlights
Table 4. Abbreviated list of POST error codes (continued) v Follow the suggested actions in the order in which they are listed in the Action column until the problem is solved. v See the parts listing in the Problem Determination and Service Guide to determine which components are customer replaceable units (CRU) and which components are field replaceable units (FRU). v If an action step is preceded by "(Trained service technician only)," that step must be performed only by a trained service technician. Error code Description Action 5962 IDE DVD drive configuration error. 1. Run the Configuration/Setup Utility program and load the default settings (see "Starting the Configuration/Setup Utility program" on page 44). 2. Reseat the following components: a. DVD drive cable b. DVD drive c. System board 3. Replace the components listed in step 2 one at a time, in the order shown, restarting the server each time. 8603 Pointing-device error. 1. Reseat the pointing device. 2. Replace the following components one at a time, in the order shown, restarting the server each time: a. Pointing device b. (Trained service technician only) System board 00012000 Processor machine check error. 1. (Trained service technician only) Reseat the microprocessor. 2. Replace the following components one at a time, in the order shown, restarting the server each time: a. (Trained service technician only) Microprocessor b. (Trained service technician only) System board Chapter 5. Solving problems 57