IBM 43635gu Installation Guide - Page 64
Table, Abbreviated, error, codes, continued, Problem, Determination, Service, Guide, System,
UPC - 883436002950
View all IBM 43635gu manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 64 highlights
Table 4. Abbreviated list of POST error codes (continued) v Follow the suggested actions in the order in which they are listed in the Action column until the problem is solved. v See the parts listing in the Problem Determination and Service Guide to determine which components are customer replaceable units (CRU) and which components are field replaceable units (FRU). v If an action step is preceded by "(Trained service technician only)," that step must be performed only by a trained service technician. Error code Description Action 175 Service processor flash code 1. Update the Remote Supervisor damaged or not loaded. Adapter II SlimLine firmware Note: In this case, the service (see the Problem processor is the optional Remote Determination and Service Supervisor Adapter II SlimLine. Guide on the IBM System x Documentation CD). 2. Replace the Remote Supervisor Adapter II SlimLine. 184 Power-on password damaged. 1. Run the Configuration/Setup Utility program, select Load Default Settings, and save the settings. 2. Reseat the battery. 3. Replace the following components one at a time, in the order shown, restarting the server each time: a. Battery b. (Trained service technician only) System board 187 VPD serial number not set. 1. Set the serial number by updating the BIOS code level (see the Problem Determination and Service Guide on the IBM System x Documentation CD). 2. (Trained service technician only) Replace the system board. 189 Three attempts were made to Restart the server and enter the access the server with an incorrect administrator password; then, run password. the Configuration/Setup Utility program and change the power-on password. 289 A DIMM has been disabled by the 1. Make sure that the DIMM is system. installed correctly (see "Installing a memory module" on page 13). 2. Replace the DIMM. 3. (Trained service technician only) Replace the system board. 50 System x3200 Type 4362 and 4363: Installation Guide