IBM 43635gu Installation Guide - Page 69
action
UPC - 883436002950
View all IBM 43635gu manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 69 highlights
Table 4. Abbreviated list of POST error codes (continued) v Follow the suggested actions in the order in which they are listed in the Action column until the problem is solved. v See the parts listing in the Problem Determination and Service Guide to determine which components are customer replaceable units (CRU) and which components are field replaceable units (FRU). v If an action step is preceded by "(Trained service technician only)," that step must be performed only by a trained service technician. Error code Description Action 1806 PCI built in self-test failure. 1. If the error code indicates a particular PCI or PCI-E slot or device, remove that device. 2. Reseat the following components: a. Each adapter b. (Trained service technician only, if the specified board is a FRU) The board that is indicated in the error code. 3. Replace the components listed in step 2 one at a time, in the order shown above, restarting the server each time. 1807, 1808 General PCI error. 1. Make sure that no devices have been disabled in the Configuration/Setup Utility program. 2. Replace each adapter one at a time, restarting the server each time. Chapter 5. Solving problems 55