IBM 8486 User Guide - Page 21
Power-on, Power-cord, connector, Power, supply, error, power, Mouse, Keyboard, Serial
UPC - 000435839718
View all IBM 8486 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
Rear view Power-on LED When this LED is lit, it indicates that the server is turned on. When this LED is off, it indicates that ac power is not present, or the power supply or the LED itself has failed. Note: If this LED is off, it does not mean that there is no electrical power in the server. The LED might be burned out. To remove all electrical power from the server, you must disconnect the power cord from the electrical outlet. The following illustration shows the connectors on the rear of the server. Power-cord connector Connect the power cord to this connector. Power supply error LED When this amber LED is lit, it indicates that a power supply error has occurred. AC power LED When this green LED is lit, it indicates that the server is connected to an ac power source. Mouse connector Connect a mouse or other PS/2® device to this connector. Keyboard connector Connect a PS/2 keyboard to this connector. Serial 1 connector Connect a 9-pin serial device to this connector. Chapter 1. The xSeries 100 Type 8486 server 9