IBM 8486 User Guide - Page 35
Installing, drive
UPC - 000435839718
View all IBM 8486 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
Installing a drive Depending on the server model, one or more of the following drives might be installed in the server: v Diskette (optional) v Hard disk drive v CD-ROM, CD-RW, or DVD/CD-RW combo The server might come with an IDE CD-ROM drive in bay 1 and a 3.5-in. Serial ATA hard disk drive in bay 4. Bay 1 Bay 2 Bay 3 Bay 4 Bay 5 The following notes describe the types of drives that the server supports and other information that you must consider when installing removable-media and hard disk drives: v Read the documentation that comes with the drive and make sure that you have all the cables and other equipment specified in the documentation that comes with the drive. v The server supports a maximum of two hard disk drives, four DIMMs, and one 5.25-inch device; or, one hard disk drive, four DIMMs, and two 5.25-inch devices; or, two hard disk drives, two DIMMs, and two 5.25-inch devices. v Diskette drives, tape drives, CD-ROM, CD-RW/DVD combo drives are examples of removable-media drives. You can install removable-media drives in bays 1, 2, and 3 only. Chapter 2. Installing options 23