IBM 8862 User Manual - Page 58
IBM 8862 - Eserver xSeries 365 Manual
UPC - 000435172679
View all IBM 8862 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 58 highlights
Repeating The I/O board or other internal boards might contain a beeps failing component. 1-1-2 1-1-3 1-1-4 1-2-1 1-2-2 1-2-3 1-2-4 1-3-1 1-3-2 1-4-3 2-1-1 2-1-2 2-1-3 2-1-4 2-2-1 2-2-2 2-2-3 2-2-4 2-3-1 Microprocessor register test has failed. CMOS write/read test has failed. BIOS ROM checksum has failed. Programmable Interval Timer test has failed. DMA initialization has failed. DMA page register write/read test has failed. RAM refresh verification has failed. First 64 Kb RAM test has failed. First 64 Kb RAM parity test has failed. Interrupt vector loading test has failed. Secondary DMA register test has failed. Primary DMA register test has failed. Primary interrupt mask register test has failed. Secondary interrupt mask register test has failed. Interrupt vector loading has failed. Keyboard controller test has failed. CMOS power failure and checksum checks have failed. CMOS configuration information validation has failed. Screen initialization has failed. 2-3-2 2-3-3 2-3-4 2-4-1 3-1-1 3-1-2 3-1-3 3-1-4 3-2-1 3-2-2 3-2-4 3-3-1 Screen memory test has failed. Screen retrace tests have failed. Search for video ROM has failed. Screen test indicates the screen is operable. Timer tick interrupt test has failed. Interval timer channel 2 test has failed. RAM test has failed above address hex 0FFFF. Time-of-Day clock test has failed. Serial port test has failed. Parallel port test has failed. Comparison of CMOS memory size against actual has failed. A memory size mismatch has occurred. v Make sure that the keyboard and pointing devices are connected properly. v Make sure that nothing is resting on the keyboard. v Disconnect the pointing device; then, restart the server. If the problem is corrected, replace the pointing device. If the problem remains, call for service. Call for service. Reseat the memory modules or install a memory module. If the problem remains, call for service. Call for service. Turn off the server, disconnect all power cords, and reconnect all power cords; then, restart the server. If the problem remains, call for service. Call for service. Reseat the memory modules or install a memory module. If the problem remains, call for service. 46 xSeries 365 Type 8861 and 8862: Installation Guide