Icom IC-F8101 Instruction Manual - Page 16
■ VFO operation
View all Icom IC-F8101 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
2 BASIC OPERATION ■ VFO operation In the VFO mode, you can set a desired operating frequency, operating mode or split frequency function. NOTE: • The VFO mode operation can be disabled by the "VFO Mode" item of "Setmode." (Main Menu > Setmode > Config) • While in the VFO mode, the Selcall, ALE features, Scan function or the Emergency key cannot be used. • Entering the VFO mode qqPush [8] to enter the Main Menu screen. wwPush [r] or [s] to select "VFO," and then push [4]. • Frequency setting qqPush [A/B](§§) to select VFO A or VFO B. wwPush [t](§) or [u](§§§) to move the cursor to se- lect the desired digit to be changed. • The cursor is displayed below the selected digit. eePush [r] or [s] to change the digit. • Direct frequency setting qqPush [A/B](§§) to select VFO A or VFO B. wwHold down [4] for 1 second to enter the direct fre- quency input mode. • The previously entered frequency blinks. / Keypad • Turning ON the Split frequency function qqPush [8] to enter the Main Menu screen. wwSelect the "VFO Split" item of "Setmode." q Push [r] or [s] to select the item, and then push [4] to open the screen. (Setmode > Config) w Push [r] or [s] to select "VFO Split," and then hold down [4] for 1 second. eePush [r] or [s] to turn ON the function. • If desired, hold down [Default](§§) for 1 second to return to the default setting. rrPush [4] to save the setting, and return to the previous screen. ttPush [8] one or more times to exit the Main Menu screen. yyEnter the VFO mode. (See details to the left.) uuPush [A/B](§§) to select VFO A or VFO B, and sep- arately set the receive and transmit frequencies. • The TX frequency appears below the RX frequency. • Push [A/B](§§) changes the VFOs between transmit and receive. • Hold down [A/B](§§) for 1 second to equalize the trans- mit frequency to the receive frequency. eePush the keypad to enter the desired frequency. • Push [M] to enter the decimal point. • Push [8] to delete the number. • Push [t](§) or [u](§§§) to move the cursor. rrPush [4] to save the frequency and exit. • To turn OFF the Split frequency function, set the "VFO Split" item of "Setmode." to "OFF." (Main Menu > Setmode > Config) 10