Icom IC-F8101 Instruction Manual - Page 23
Clear Talk function, Clear Talk Level, C TALK] - enhanced
View all Icom IC-F8101 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
Quick Reference RECEIVE AND TRANSMIT 3 DDClear Talk function The Clear Talk function uses the DSP circuit to enhance desired signals in the presence of noise. ➥➥Push [C TALK](8) to turn ON the Clear Talk function. • "C" appears when the Clear Talk function is ON. Appears Clear Talk function OFF Noise components Clear Talk function ON Desired signal (CW) • If desired, adjust the Clear Talk level. See the next topic for details. • If desired, push [C TALK](8) again to turn OFF the 1 function. 2 3 4 5 DDClear Talk Level 6 The Clear Talk Level must be adjusted for maximum qqPush [8] to enter the Main Menu screen. readability. Setting the "Clear Talk Level" too high re- wwSelect the "Clear Talk Level" item of "Setmode." 7 sults in audio signal masking or distortion. q Push [r] or [s] to select the item, and then / push [4] to open the screen. (Setmode > Config) 8 w Push [r] or [s] to select "Clear Talk Level" and then hold down [4] for 1 second. 9 [Default] eePush [r] or [s] to adjust the desired level to be- tween 1 and 15. • If desired, hold down [Default](§§) for 1 second to re- 10 turn to the default setting. 11 12 rrPush [4] to save the setting, and return to the pre- 13 vious screen. ttPush [8] one or more times to exit. 14 15 16 17 17