Icom IC-F8101 Instruction Manual - Page 29
Get Position call
View all Icom IC-F8101 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
SELCALL/ALE OPERATION 4 DDGet Position call The Get Position call allows you to request an intended ID station to send its position information. • Preparation for a Get Position call Send a Channel Test call on several Selcall channels, and check the propagation on each one to select the channel with the best signal quality. (p. 26) • Sending a Get Position call qqHold down [ ] for 1 second to enter the Network selection screen. wwPush [r] or [s] to select the desired Network, and then push [ ]. • The Networks that belong to the Icom Selcall or Open Selcall systems must be selected. eePush [r] or [s] to select the Call Type to "Get Position." • "Selective," "Phone," "Message," "Send Position," "Get Position," "Get Status," "Emergency," "Channel Test" and "Stun" are selectable. The Get Status call is selectable in the Icom Selcall, and the Stun call is selectable in the Open Selcall. rrPush keypad to enter the Call ID, and then push [ ]. • The previously entered Call ID is displayed. • Push [t](§) or [u](§§§) to move the cursor. • Push [8] to delete the digit to the left of the cursor. • This Call ID is not stored in the Call ID list. ttPush [r] or [s] to select the Profile, then push [ ]. yyPush [r] or [s] to select the Channel. • Only the channels that belong to the selected Network in step w, are displayed. • If desired, push [Tests](§§) to transmit the Channel Test call in this step. uuPush [ ] to transmit the Send Position call. The call is stored in the Call Out memory. • While calling, push [PTT] to cancel the call. You can also make a Get Position call when the Address screen is displayed. In this case, you can skip several steps, see page 29 for the Simple Selcall operation details. • Receiving a Get Position call acknowledgement qqAfter the call is transmitted, your called station 1 sends position and time information as an acknowl- edgement. 2 3 4 wwPush any key to return to the normal operating screen. eePush [8] to enter the Main Menu screen. 5 rrPush [r] or [s] to select "Call In," and then push [4]. 6 7 8 ttPush [r] or [s] to select the desired Call, and then push [4]. 9 10 11 yyPush [r] or [s] to select the information. 12 13 14 uuPush [8] twice to return to the normal operating screen. 15 • Receiving a Get Position call When your transceiver receives a Get Position call that includes your individual ID, it automatically responds 16 by transmitting. 17 Quick Reference 23